SNMP & PoE managed Switch with Advanced VLAN Policy for Video Conferring | Surveillance | Voice | Data
The AirLive POE-GSH802M-120 is a L2+ managed 10-port Gigabit PoE+ switch including 8 PoE ports and 2 Gigabit SFP ports with high 120W PoE power. Each PoE port is 802.3at/af compliant up to 30W, automatically adaptive. Data and Power supply will be transferred over Cat. 5e cables at the same time. For non-PoE device detected, only data is transferred.
The 10-port Gigabit management switch offers comprehensive SNMP management functions including IGMP, VLAN Division, Port aggregation, QoS port mirroring, bandwidth control. Its unique “VLAN Division Policy function” allows setting “Video Conference, Surveillance, Voice, or Data” such important VLAN group at higher priority that prevents package loss or lags.
The 10-port Gigabit management switch offers comprehensive SNMP management functions including IGMP, VLAN Division, Port aggregation, QoS port mirroring, bandwidth control. Its unique “VLAN Division Policy function” allows setting “Video Conference, Surveillance, Voice, or Data” such important VLAN group at higher priority that prevents package loss or lags.
Efficient PoE Watch Guard | PoE Watch dog technology and PoE Management
POE-GSH802M-120 supports 120W high power and each port up to 30W auto adaptively. With PoE management function to control PoE port setting, Timer setting and Timer reboot setting and PoE watchdog. All the PoE management functions ensure full power for the connected PD and great reliability for the whole system.
After PoE Watchdog function enabled, the POE-GSH802M-120 can work as a virtual security guard. When the POE port is continuously powered but there is no traffic, the POE watchdog will be triggered. After 2 minutes of detection, the power supply will be stopped and then powered on. PoE Watchdog is specially helpful for camera. For example, when turning on the function, the switch will detect the front-end camera for 24/7. If there is no traffic output from the camera, it will be judged that the camera is frozen and the front-end camera will be restarted through PoE power failure to solve the problem.
After PoE Watchdog function enabled, the POE-GSH802M-120 can work as a virtual security guard. When the POE port is continuously powered but there is no traffic, the POE watchdog will be triggered. After 2 minutes of detection, the power supply will be stopped and then powered on. PoE Watchdog is specially helpful for camera. For example, when turning on the function, the switch will detect the front-end camera for 24/7. If there is no traffic output from the camera, it will be judged that the camera is frozen and the front-end camera will be restarted through PoE power failure to solve the problem.
Surveillance VLAN Support
POE-GSH802M-120 supports unique “VLAN division” function for setting up important VLAN group at high priority to make sure whole system’s performance and reliability. Its VLAN Division function including Surveillance VLAN, Voice VLAN, MED Network (Video Conferring) and Data VLAN. For example, when enable Surveillance VLAN functions that ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data.
Features
- All 10-port, each port delivers Gigabit high speed
- Extend the network further with 2 SFP slots that accept fiber transceivers and go beyond the limits of Ethernet
- 120W High PoE power, ensure full power for connected device
- Automatically detect and offer power for connected PD
- Support L2+ SNMP and WEB Smart management function, including DHCP Snooping, VLAN, IGMP, QoS, Spanning Tree, MAC Binding and Bandwidth Control
- Surveillance VLAN property and Voice VLAN support for high-priority transmission
- Support PoE management
- Support PoE watchdog to automatically detect and restart crashed PD
- Clear Statues display including traffic, CPU, Memory, POE consumption, per-port status
- Web-UI for easy management; CLI and Command Script for advanced setting; SNMP used for popular network tools management.
Technical Specifications
| Hardware | |
| Model | AirLive POE-GSH802M-120 |
| Device Interface | 8 x 30W PoE 10/100/1000 RJ45 2 x ports Gigabit SFP 10-port totally 1 x RJ45 console port |
| Standards |
IEEE802.3u 100Base-TX / 100Base-FX
IEEE802.3ab Gigabit 1000Base-T IEEE802.3z Gigabit SX/LX (optical fiber) IEEE802.3x Flow Control and Back Pressure IEEE802.3ad Standard method for performing link aggregation IEEE802.1d Spanning Tree (STP) IEEE802.1w Rapid Spanning Tree (RSTP) IEEE802.1s Multiple Spanning Tree (MSTP) IEEE802.1p Class of Service (QoS / CoS) traffic Prioritization (Multicast filtering function) IEEE802.1Q VLAN Bridge Operation IEEE802.1x Client/Server Access control and Authentication IEEE802.3at/af PoE IEEE802.3az Energy Efficient Ethernet IEEE802.1ab LLDP/LLDP-MED Device Link Layer Discovery Protocol |
| LED Indicators |
PWR (power supply), SYS(System), 1-8 PoE, 1-8 Link & ACT , 9-10 Link & Act, Mode (DIP Indicator), VLAN/Default/Extend
|
| Lighting Surge Protection |
6KV (general mode), 4KV (differential mode), ESD15KV
|
| Mechanical |
Solid metal 10” 1U rack-mountable, fan-less
|
| Power and PoE | |
| Protocol |
IEEE802.3at (30W), IEEE802.3af (15.4W)
|
| PoE Port | 8 |
| PoE Power Output / PoE Port | max. 30 watts |
| PoE Power Output / PoE switch | max. 120 watts |
| Power Input | AC100~240VAC, 120W |
| Switch Architecture | Performance | |
| Fiber Medium |
Multi-mode Fiber: 50/125, 62.5/125, 100/140μm
Single-mode Fiber: 8/125, 8.7/125, 9/125, 10/125μm |
| Switching architecture: Store and Forward |
Switch Capacity: Back-plan up to 20Gbps
Switch packets Capacity; 14.88Mpps MAC Address: 8K Jumbo Frames: 9.6Kbytes Packet Buffer: 4Mb Flash Memory: 16MB DDR SDRAM: 128MB |
| L2/L2+ Management Function | |
| Port Management | Enable / Disable Port Speed, Duplex, MTU setting Flow-Control Port Information Check |
| Port Mirroring |
Support both side-way port mirroring
|
| Port Speed Limit |
Port-based input/output bandwidth management
|
| Port Isolation |
Support the downlink port isolation, and able to communicate with the uplink port
|
| Storm Suppression |
Support unknown unicast, multicast, unknown multicast
Broadcast type storm suppression Storm suppression based on bandwidth regulation and storm filtering |
| Link Aggregation |
Support static manual aggregation
Support LACP dynamic aggregation Support based on IP, MAC, mixed load-balancing modes Support Maximum 8 aggregation groups |
| VLAN |
Support 4K VLAN
Access, Trunk, Hybrid Support Port-based, Protocol-Based, MAC-Base VLAN partitioning Support Generic GVRP dynamic VLAN registration Voice VLAN |
| MAC |
Support static, dynamic, filtered, addition, deletion
MAC address learning limit Dynamic aging time setting |
| Spanning Tree |
Support STP 802.1d Spanning Tree protocol
Support RSTP 802.1w Spanning Tree protocol Support MSTP 802.1w Spanning Tree protocol Support Multi-instance, Support Aggregate interface Support BPDU protection |
| Multicast |
Support Static addition, deletion
Support IGMP-Snooping Support MLD-Snooping Support v1/2/3 dynamic multicast monitor |
| DDM | Support SFP DDM |
| Layer 3 Switching | IPv4 Static Routing IPv6 Static Routing DHCP Server |
| L2/L2+ Management Extension Function | |
| ACL (Access Control List) |
Based on source MAC, destination MAC, Protocol type, source IP, destination IP, L4 port
|
| QoS |
Based on 802.1p (CoS) classification
Based on DSCP Classification Classification based on source IP, destination IP and port number Support SP, WRR scheduling strategy Support flow rate limit CAR |
| LLDP Discovery |
Support LLDP discovery protocol, LLDP with LLDP-MED extensions (IPv4 ACL, IPv6ACL, MAC ACL)
|
| User Settings | ADD/Delete users |
| Log |
User login, operation, status, events
|
| Anti-attack (Security) |
DOS defense (port-based)
Support CPU protection and limits the rate of sending CPU packets ARP binding (IP, MAC, PORT binding) |
| IPv6 |
Support IPv6 Ping, IPv6 Traceroute, IPv6 Telnet
Support IPv6 SSH Support IPv6 HTTP, IPv6 HTTPS |
| Certification | Authentication |
Support 802.1x port authentication
Support AAA authentication Support TACAS+ authentication |
| Network diagnosis | Support Ping, Telnet, Trace |
| System Management |
Device reset, configuration save/restore, upgrade management, time setting, etc.
|
| System Management | |
| CLI |
Support serial port command line management
|
| SSH |
Support SSHv1/2 remote management
|
| Telnet |
Support Telnet remote management
|
| WEB |
Support Layer2 setting, layer2 and layer3 monitor
|
| SNMP |
SNMP V1/V2/V3; support trap (ColdStart, Warmstart, LinkDown, LinkUp)
|
| RMON (remotely management) | Support RMON1 |
| PoE | Support PoE power |
| Other Functions |
Support DHCP Snooping, Option 82, DHCP Server
Support dynamic ARP detection Support DNS certification Support Port security settings Support MVR protocol Support cable detection VCT function Support UDLD protocol |
| Environment | |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -40°C to +85°C |
| Working Humidity | 10%~90%, non-condensing |
| Storage Humidity | 5%~90%, non-condensing |
| Ordering Information | |
| Model |
POE-GSH802M-120
L2 Managed Gigabit PoE+ 802.3at switch, 120W 10 Ports including 2-port SFP Fiber |
| Standard Package | |
| Produc Size | 26.5(L) x 18.1(W) x 4.4(H) cm |
| Package Size | 31.2(L) x 26(W) x 8.4(H) cm |
| Package Weight | N.W: 1.2KGS G.W: 1.7KGS |
| Package Content | 1 x Switch 1 x Power cord 1 x Serial cable 1 x Mounting bracket 1-pair |
| Carton Package | |
| Quantity | 10 PCS / 1 Carton |
| Dimensions | 54(L) x 43.5(W) x 33.2(H) cm |
| Weight | 18 KGS |