Easy to configure and install, the RV260 routers can be remotely deployed using Plug and Play (PnP), are supported by the Cisco FindIT network platform, and feature a new user interface.These models have a dual-core processor that provides performance usually found only in more expensive solutions. A Small Form-Factor Pluggable (SFP) WAN port provides flexible connectivity and investment protection.
Quick Specs
| Product Code | RV260P-K9-G5 |
| Device Dimension | L x W x H:279x170x38.5 mm |
| Ethernet WAN | 1 RJ-45 SFP Gigabit combination port |
| Ethernet LAN |
8 RJ-45 Gigabit Ethernet ports
RV260P has 4 PoE ports with a 60W power budget |
| Console port | 1 RJ-45 port |
| Switch | Power on/off |
| Cabling type | Category 5 or better |
| LEDs | Power, VPN, WAN, LAN |
| Operating system | Linux |
| NAT throughput | 800+ Mbps |
| Concurrent sessions | 25,000 |
| IPsec VPN throughput | 75+ Mbps |
Technical Specifications
| RV260P-K9-G5 Specification | |
| Device Dimension | L x W x H:279x170x38.5 mm |
| Ethernet WAN | 1 RJ-45 SFP Gigabit combination port |
| Ethernet LAN |
8 RJ-45 Gigabit Ethernet ports
RV260P has 4 PoE ports with a 60W power budget |
| Console port | 1 RJ-45 port |
| Switch | Power on/off |
| Cabling type | Category 5 or better |
| LEDs | Power, VPN, WAN, LAN |
| Operating system | Linux |
| LAN | |
| VLANs | 16 |
| Port security | Yes, 802.1X |
| IPv6 | Dual stack, 6rd, 6in4 |
| WAN |
Dynamic Host Configuration Protocol (DHCP) client, static IP, Point-to-Point Protocol over Ethernet (PPPoE), PPTP, Layer 2 Tunneling Protocol (L2TP)
|
| WLAN | 3x3 802.11ac Wave 2 |
| Security | |
|
Firewall
|
SPI firewall |
| Port forwarding and triggering | |
| Denial-of-Service prevention (DoS) | |
| Access control | IP access control lists |
| Secure management | HTTPS, username/password complexity |
| User privileges | Two levels of access: Admin and guest |
| Network | |
| Network protocols |
• Dynamic Host Configuration Protocol (DHCP) server
• Point-to-Point Protocol over Ethernet (PPPoE) • Point-to-Point Tunneling Protocol (PPTP) - Layer 2 Tunneling Protocol (L2TP) • DNS proxy • DHCP relay agent • Internet Group Management Protocol (IGMP) proxy and multicast forwarding • Rapid Spanning Tree Protocol (RSTP) • Dynamic DNS (DynDNS, No-IP, ChangeIP) • Network Address Translation (NAT), Port Address Translation (PAT) • One-to-one NAT • Port management • Port mirroring • Software-configurable DMZ to any LAN IP address - Session Initiation Protocol (SIP) Application Layer Gateways (ALG) |
| Routing protocols | • Static routing, IGMP proxy • Dynamic routing • Routing Information Protocol (RIP) v1 and v2 • RIP for IPv6 (RIPng) - Inter-VLAN routing |
|
NAT protocol
|
Port Address Translation (PAT), Network Address Port Translation (NAPT)
|
|
Port forwarding, One-to-one NAT, VPN NAT Traversal, Session Initiation Protocol (SIP), ALG, FTP ALG
|
|
| VPN | |
| Gateway-to-gateway IPsec VPN | 20 IPsec tunnels |
| Client-to-gateway IPsec VPN | 20 IPsec tunnels |
| IPsec VPN |
Internet Key Exchange (IKE) v2, Generic Routing Encapsulation (GRE), hub and spoke supported
|
| PPTP VPN | 20 PPTP VPN tunnels |
| OpenVPN | Support for the OpenVPN server |
| Encryption |
Triple Data Encryption Standard (3DES), Advanced Encryption Standard (AES) with 128, 192, and 256-bit keys encryption
|
| VPN pass-through | IPsec, PPTP, and L2TP pass-through |
| Quality of Service (QoS) | |
| QoS |
• 802.1p port-based priority on LAN port, application-based priority on WAN port
• 4 queues • Differentiated Services Code Point (DSCP) support • Class of Service (CoS) • Bandwidth management for service prioritization |
| Jumbo frame support |
Supports jumbo frames on Gigabit ports – at least 1536B
|
| Performance | |
| NAT throughput | 800+ Mbps |
| Concurrent sessions | 25,000 |
| IPsec VPN throughput | 75+ Mbps |
| Configuration | |
| Web-based user interface | Browser-based configuration (HTTP/HTTPS) |
| Management |
Web-based user interface, Simple Network Management Protocol (SNMP) v3, Bonjour, PnP
Command-line interface via console – limited configuration command support FindIT support for monitoring and management |
| Event logging | Local, syslog, email alerts |
| Network diagnostics | Ping, traceroute, DNS lookup |
| Upgradability |
Firmware upgradable via browser UI, imported/exported file, USB, Cisco FindIT
|
| System time |
Network Time Protocol (NTP), Daylight Savings, manual entry
|
| Language support | User interface support: English |
| Environmental | |
| Power | 54VDC/1.67A |
| Operating temperature | 0° to 40 °C (32° to 104 °F) |
| Storage temperature | -20° to 70 °C (-4° to 158 °F) |
| Operating humidity | 10% to 85% noncondensing |
| Storage humidity | 5% to 90% noncondensing |
| Certifications |
Safety:
• UL 60950-1 • CAN/CSA-C22.2 No. 60950-1 • IEC 60950-1 • EN 60950-1 Radio approvals: • FCC Part 15.247, 15.407 • RSS-210 (Canada) • EN 300.328, EN 301.893 (Europe) • AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility: • FCC Part 15.107 and 15.109 • ICES-003 (Canada) • EN 301.489-1 and -17 (Europe) - RV260/RV260P rackmount: Class A |