Clearance Sale: HPE Aruba 2920-48G 48 Port Gigabit Switch (J9728A)
Clearance Sale: HPE Aruba 2920-48G 48 Port Gigabit Switch (J9728A)
  • Load image into Gallery viewer, Clearance Sale: HPE Aruba 2920-48G 48 Port Gigabit Switch (J9728A)
  • Load image into Gallery viewer, Clearance Sale: HPE Aruba 2920-48G 48 Port Gigabit Switch (J9728A)

Clearance Sale: HPE Aruba 2920-48G 48 Port Gigabit Switch (J9728A)

Regular price
₱50,000.00
Sale price
₱50,000.00
Regular price
Sold out
Unit price
per 

The Aruba 2920 Switch Series provides security, scalability, and ease of use for enterprise edge, SMB and branch office networks. A powerful ProVision ASIC delivers low latency, more packet buffering, and adaptive power consumption. This Basic Layer 3 switch series supports modular stacking, 10GbE, PoE+, static and RIP routing, Access OSPF routing, Tunneled Node, ACLs, sFlow, and IPv6. The 2920 delivers a consistent wired/wireless user experience with advanced security and network management tools with Aruba ClearPass Policy Manager and Aruba AirWave. With support from Aruba Central, you can quickly set up remote branch sites with little or no IT support. The 2920 is optimized for Software-defined Networking (SDN) with OpenFlow support.

The Aruba 2920 Switch Series provides cost-effective pay as you grow modular stacking with a 2-port stacking module, support for up to four 10GBASE-T (or SFP+) uplinks and upgradeable power supplies so your network can quickly scale when needed. The robust Basic Layer 3 feature set requires no licensing and includes a limited lifetime warranty.

Features

  • Aruba Basic Layer 3 switch series with stacking, static & RIP routing, IPv6, ACLs, and sFlow
  • Advanced security and network management tools with Aruba ClearPass Policy Manager and Aruba AirWave
  • Modular 10GbE uplinks (SFP+ and 10GBASE-T) and upgradeable power supplies for up to 1440W PoE+
  • Simple deployment with Zero Touch Provisioning and cloud-based Aruba Central support
  • Ready for innovative SDN applications with OpenFlow support

 

    Technical Specifications

    Model Aruba 2920-48G Switch (J9728A)
    I/O ports and slots
    44 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
    802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
    4 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type
    1000BASE-T)
    2 module slots
    Additional ports and slots

    1 stacking module slot
    1 dual-personality (RJ-45 or USB micro-B)
    1 USB 1.1
    1 RJ-45 out-of-band management port
    Power supplies

    1 power supply slot
    1 minimum power supply required
    includes: 1 x J9739A (HPE X331
    165W 100-240VAC to 12VDC Modu-
    lar Power Supply)
    Physical characteristics
    Dimensions 17.42 (w) x 13.23 (d) x 1.73 (h) in
    (44.25 x 33.6 x 4.4 cm)
    (1U height)
    Weight 11.95 lb (5.42 kg)
    Memory and processor
    Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM; Packet buffer size:
    11.25 MB (6.75 MB dynamic egress
    + 4.5 MB ingress), 1 GB flash
    Performance
    100 Mb Latency < 9.0 µs (FIFO 64-byte packets)
    1000 Mb Latency < 3.3 µs (FIFO 64-byte packets)
    10 Gbps Latency < 3.2 µs (FIFO 64-byte packets)
    Throughput up to 130.9 Mpps
    Switching capacity 176 Gbps
    Routing table size 2048 entries (IPv4), 256 entries (IPv6)
    MAC address table size 16000 entries
    Environment
    Operating temperature 32°F to 131°F (0°C to 55°C)
    Operating relative humidity 15% to 95%, noncondensing
    Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C)
    Nonoperating/Storage relative humidity 15% to 95%, noncondensing
    Altitude up to 10,000 ft (3 km)
    Acoustic Power: 57 dB, Pressure: 41.8 dB
    Electrical characteristics
    Frequency 50/60 Hz
    Achieved Miercom Certified Green Award
    80plus.org Certification Silver
    Maximum heat dissipation 239 BTU/hr (252.15 kJ/hr)
    Voltage 100 - 240 VAC, rated
    (depending on power supply chosen)
    Maximum power rating 70 W
    Idle power 27 W
    PoE power
    Notes
    Idle power is the actual power consumption of the device with no ports connected.
    Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
    Safety
    CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60825-
    1; IEC 60950-1, Second Edition; EN62479:2010; CSA C22.2 No.
    60950-1-07 2nd Edition; EN 60950-1:2006+A11:2009+A1:2010
    +A12:2011; IEC 60950-1 (ed.2): am1
    Emissions
    FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
    Immunity
    EN EN 55024, CISPR 24
    ESD IEC 61000-4-2
    Radiated IEC 61000-4-3
    EFT/Burst IEC 61000-4-4)
    Surge IEC 61000-4-5
    Conducted IEC 61000-4-6
    Power frequency magnetic field IEC 61000-4-8
    Voltage dips and interruptions IEC 61000-4-11
    Harmonics IEC 61000-3-2
    Flicker IEC 61000-3-3
    Management
    Aruba AirWave Network Manage- ment; IMC – Intelligent Management Center; Command-line interface; Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP manager; Telnet; RMON1; FTP; In-line and out-of- band; Out-of-band management (serial RS-232c or micro usb)
    Services
    Refer to the Hewlett Packard Enterprise website at www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.