Application-specific WISP control point with (5) Gigabit RJ45 ports and an SFP port.
Ubiquiti introduces the EdgePoint™, part of the EdgeMAX® platform. The first application-specific designed WISP control point, the EdgePoint combines EdgeMAX routing features with fiber backhaul and versatile powering capabilities.
The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity.
Technical Specification
Ubiquiti introduces the EdgePoint™, part of the EdgeMAX® platform. The first application-specific designed WISP control point, the EdgePoint combines EdgeMAX routing features with fiber backhaul and versatile powering capabilities.
The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity.
Features
- Five RJ45 Ethernet ports and one SFP Ethernet port
- Weatherproof Enclosure for Outdoor Use
- Powerful Routing or Switching Features
- Fiber Backhaul Capability
- Intuitive User Interface
Technical Specification
| Mechanical | |
| Dimensions |
188.6 x 177.1 x 49.8 mm (7.43 x 6.97 x 1.96")
|
| Weight | 605 g (1.33 lb) |
| Enclosure Characteristics |
UV-Resistant Polycarbonate
|
| Mount | Pole Mount |
| Wind Loading |
46 N at 200 km/h (10.34 lbf at 125 mph)
|
| Wind Survivability |
200 km/h (125 mph)
|
| Hardware | |
| Max. Power Consumption |
7W (Excludes PoE Output)
|
| Power Input* |
(1) DC Terminal Block
(1) RJ45 (eth0) *Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs |
| Power Supply |
Min. 24V / 0.3A (Excludes PoE Output Power)
|
| VDC Input | 24V, 3A |
| Passive PoE Input* |
(1) 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0
*Do NOT Configure eth0 in PoE Output Mode if You Are Using a PoE Input Power Source. |
| Passive PoE Output |
(5) 24V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth0 to eth4
|
| Power Monitoring |
(1) DC Terminal Block, Input Power
(1) RJ45, eth0, Input Power |
| Supported Voltage Range | 26 to 16VDC |
| Button | Reset |
| LEDs System eth0 to eth4 eth5/SFP |
Power
Speed/Link/Activity, PoE Speed/Link/Activity |
| Ports Data Ports |
(5) 10/100/1000 RJ45 Ports
(1) 1 Gbps SFP Port |
| Processor |
Dual-Core 880 MHz, MIPS1004Kc
|
| System Memory |
256 MB DDR3-1600 RAM
|
| Code Storage | 256 MB NAND |
| Operating Temperature |
-40 to 65° C (-40 to 149° F)
|
| Operating Humidity |
10 to 90% Noncondensing
|
| Certifications | CE, FCC, IC |