Wi-Tek wireless series ceiling AP is a high-performance ceiling AP suitable for indoor large-area Wi-Fi coverage scenarios. The device supports 802.3af PoE and a 12V DC local power supply. The dual LAN port design facilitates the expansion of third-party devices and meets the needs of more networking scenarios. The coverage of more than 20 meters makes it an ideal choice for many wireless scenarios, especially office, commercial industry, hotel, service scenarios, etc. In addition, the wireless AP also supports cloud management functions. Users can quickly complete network-wide equipment deployment, configuration, remote management, and operation and maintenance, greatly reducing equipment costs, labor costs, and time costs for wireless network construction.
Features
- 2 x 10/100Mbps Ethernet Port
- 300Mbps at 2.4GHz
- Support fast roaming technology
- Support Fit/Fat/Repeater/WISP modes
- Support AP controller and cloud management
Technical Specifications
| Hardware Version | |
|---|---|
| Wireless Standards | 802.11n/b/g/a |
| Operating Bands | 2.4GHz |
| Antenna | 2.4GHz: 3.5dBi |
| Spatial Streams | 2.4GHz: 2x2 MIMO |
| Signal Rate | Up to 300Mbps at 2.4G |
| 2.4GHz: | |
| 802.11n: -70dbm@MCS7 | |
| -88dbm@MCS0. 802.11g: -72dbm@54Mbps | |
| -90dbm@6Mbps. 802.11b: -85dbm@11Mbps | |
| -94dbm@1Mbps. | |
| Receiver Sensitivity | |
| Maximum Transmit Power | <27dbm |
| Interface | (2)10/100M Base-T Ethernet ports |
| Power Supply | DC 12V/1A (Not Included) 802.3af PoE Supported |
| Power Consumption | <10W |
| Installation | Wall/Ceiling Mounting |
| External Buttons | reset button (long press for 8 seconds to restore the factory default configuration) |
| Dimensions | 188mm * 188mm * 35mm |
| Operating Temperature: | |
| -40℃~55℃ | |
| Storage Temperature: | |
| Environment | -40°C~70°C |
| Operating Humidity: 5%~95% (non-condensing) Storage Humidity: 5%~95% (non-condensing) | |
| Software Features | |
|---|---|
| Operating Mode | Fit AP, Fat AP, Repeater, WISP mode |
| Up to 8 SSIDs | |
| Support SSID hiding, Enable/Disable Wireless Radio | |
| Wireless Function | RF Parameter setting |
| Roaming | Support Layer 2 roaming |
| Captive Portal Authentication Static blacklist and whitelist Wireless Isolation Between Clients SSID to VLAN Mapping | |
| Support 802.1X WPA/WPA2/PSK/WPA/WPA2-Enterprise | |
| Wireless Security | |
| Routing | Support static IP, DHCP, PPPoE Dial-Up |
| Management | Support local management with web |
| Support remote management with Wi-Tek Cloud platform | |
| Automatic RF adjustment via the platform Unified configuration via the platform Unified monitoring via the platform | |
| Platform Management Features | |